I made this Instructional video to help explain how this RF unit works.
https://youtu.be/kwYo0U3W8vU
2. The way of output
A. Signal keeps 3 seconds-- “1” connect
B. Signal self-locking -- “2” connect
C. Signal interlock -- “3” connect
D. Signal point start--disconnect
(check the Circuit diagram for details)
3. Learning way and steps
1. Press learning key of receiver—the pilot lamp light—release learning key and pilot lamp extinguish , indicate enter into the status of learning.
2. Press any button of the remote control, indicate learning success as the pilot lamp flash 5 times and automatically exit learning state. Receiver automatically exit learning state if you do nothing in 32 seconds.
4. Delete memory message
Press the learning key of the receiver—pilot lamp light—hold on pressing over 8 seconds until the pilot lamp extinguish, which indict success to delete the memory message.
5. Main Technique Data
Working voltage DC12V/
Static working current ≤7mA
Working temperature -40℃ - +80℃
Receiving sensitive ≥-105dBm
Working frequency 433MHz
Relay capacity 10A 250VAC or 10A 30VDC
Receive the type of encoding Learning code, Fixed code, Rolling/Hoping code
Maximum storage for transmitter 30pcs of learning or fixed code; 6pcs of rolling code
Size 74.5mmⅹ54.5mmⅹ27mm
If you would like a FREE catalog of my eBay store, just add
a note, or send me a message, during or after check out.